10. Using Menu Functions
190
If you select [CUSTOM], you can customise the Quick Menu settings. (P49)
This changes the operation method of the [iA] button.
This sets which control functions will be disabled when [Operation Lock] is set in [Fn
Button Set] (P50) of the [Custom] ([Operation]) menu.
Enables/disables the motion picture button.
Enables/disables the Touch operation.
> [Custom] > [Operation]
[Q.MENU]
[iA Button Switch]
[Single Press]
Switches the camera between Intelligent Auto Mode and Recording Mode
(P/A/S/M) when you press [iA].
[Press and hold]
Switches the camera between Intelligent Auto Mode and Recording Mode
(P/A/S/M) when you press and hold [iA] for a short while.
[Operation Lock Setting]
[Cursor] Disables the functions of the cursor button and the [MENU/SET] button.
[Touch Screen] Disables the touch functions of the touch panel.
[Dial] Disables the functions of the control dial and control ring.
[Video Button]
[Touch Settings]
[Touch Screen] All touch operations.
[Touch Tab]
Operations of tabs, such as [ ] on the right side of the screen.
[Touch AF]
Operation to bring the subject you touch into focus ([AF]) or adjust the
focus and brightness ([AF+AE]). (P86)
[Touch Pad AF]
Operation to move the AF area by touching the monitor when the
viewfinder is in use. (P85)
MENU
To Next Page
Loading...
