10. Using Menu Functions
202
∫ [Bluetooth] (P231)
∫ [Remote Wakeup] (P237)
∫ [Returning from Sleep Mode] (P241)
∫ [Auto Transfer] (P243)
∫ [Location Logging] (P245)
∫ [Auto Clock Set] (P246)
∫ [Wi-Fi network settings]
Registers a wireless access point. (P263)
This enables/disables the WIRELESS connection lamp.
If you select [OFF], they will not light/flash.
This allows you to set the electronic sound and the electronic shutter sound.
Settings: [Beep Volume]/[Shutter Vol.]/[Shutter Tone]
[Bluetooth]
• The wireless access point used for the Wi-Fi connection is automatically registered.
• Up to 17 wireless access points can be registered. If you try to register more than 17 access
points, the oldest registered access points will be deleted.
• Performing [Reset Network Settings] will delete registered wireless access points.
[Wireless Connection Lamp]
[Beep]
• [Beep] is not available when [Silent Mode] is set to [ON].
To Next Page
Loading...
