10. Using Menu Functions
206
[HDMI Mode (Play)]:
This sets the video format to be used for output in Playback Mode when the camera and a TV or
monitor is connected with an HDMI micro cable.
[VIERA Link]:
If you select [ON], operations of the camera and the VIERA Link compatible equipment
connected to the camera with an HDMI micro cable are automatically linked, enabling you to
control the camera with the remote control of the VIERA Link compatible equipment.
Set the language displayed on the screen.
This enables the firmware versions of the camera to be checked.
[TV Connection]
[AUTO]
Outputs images at an output resolution suited to the
connected TV.
[4K/25p]/[1080p]/[1080i]/[720p]/
[576p]
Outputs images at the selected resolution.
• The output resolution for [4K/25p] is 3840k2160.
• Even when [4K/25p] is set, MP4 motion pictures
recorded with [4K/100M/30p] will be output at a
resolution of [4K/30p].
• Even when [576p] is set, depending on the connected
TV, images will be output at a resolution of [480p].
• If no image appears on your TV when [AUTO] is set, switch to a setting other than [AUTO] that
can display images on the TV.
[Language]
• If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Version Disp.]
• To display information about the software on the unit, press [MENU/SET] on the version
display screen.
To Next Page
Loading...
Need help?
General
