207
10. Using Menu Functions
Set the folder and file name patterns in which images are to be saved.
[Folder / File Settings]
Folder name File name
1
Folder number (3-digits, 100–999)
1
Colour space ([P]: sRGB, [ _ ]:
AdobeRGB)
2
5-digit user-defined segment
2
3-digit user-defined segment
3
File number (4-digits, 0001–9999)
4
File extension
[Select Folder]
Specifies the folder to which images are to be saved.
• The folder name is indicated with the number of files that can be stored.
[Create a New
Folder]
[OK]
Creates a new folder with the same 5-digit user-defined
segment as the current folder name setting.
[Change]
Allows you to redefine the 5-digit user-defined segment
before creating a new folder.
• Available characters: alphabet (upper case characters),
numbers, and [ _ ]
• For information on how to enter characters, refer to P56.
• A new folder with an incremented folder number is created.
• If there are no recordable folders in the card, a screen for resetting the
folder number is displayed.
[File Name
Setting]
[Folder
Number Link]
Uses the folder number of the folder name as the file
name’s 3-digit user-defined segment.
[User Setting]
Allows you to define and set the 3-digit user-defined
segment of the file name.
• Available characters: alphabet (upper case characters),
numbers, and [ _ ]
• For information on how to enter characters, refer to P56.
PABC0001.JPG
To Next Page
Loading...
Need help?
General
