229
11. Using the Wi-Fi/Bluetooth function
∫ Operations that can be performed by pressing [Wi-Fi]
When the camera is not connected to Wi-Fi, press [Wi-Fi]. The camera will then be
ready to be connected to the smartphone. You can connect the camera directly to
the smartphone. (P233)
• When the camera is ready, you may find it convenient to press [DISP.] to access History, which
stores previous connections, and connect quickly. (P267)
After connecting to a Wi-Fi network, you can perform the following operations by
pressing [Wi-Fi]:
• Depending on the Wi-Fi function being used or the connection destination, you may not be able
to perform some of these operations.
∫ Describing method
When “select [Select a destination from History]”, etc. is
described in a step, perform any of the following operations.
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
Terminates the Wi-Fi connection, and allows you to select
a different Wi-Fi connection.
[Change Settings for Sending
Images]
Refer to P250 for details.
[Register the Current Destination
to Favorite]
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
[Network Address] (P270)
Button operation: Select [Select a destination from History]
with the cursor button, and then press
[MENU/SET].
Touch operation: Touch [Select a destination from History].
• Do not remove the memory card or battery or move to an area without any reception
while sending images.
• The camera cannot be used to connect to a public wireless LAN connection.
• It is recommended to use a fully charged battery when sending images.
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
• Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
To Next Page
Loading...
Need help?
General
