249
11. Using the Wi-Fi/Bluetooth function
∫ Send Images Stored in the Camera
Images can be selected and sent after recording.
• Since the camera gives priority to recording, sending may take longer during the recording.
• If you turn off the camera or terminate the Wi-Fi connection before the transmission is
completed, unsent files will not be resent.
• You may not be able to delete files or use the playback menu while sending.
Not available in these cases:
• If you set [Time Lapse Shot], the Wi-Fi connection is terminated and you cannot use this
function.
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
• The setting is cancelled when the picture is selected again.
2 Select [OK].
• To close the connection, select [Exit].
Not available in these cases:
• Images recorded with another device and images modified or edited on a PC may not be sent.
ュリヴヱハ
To Next Page
Loading...
