13. Others
296
• If no operations are performed during the set time period, [Auto LVF/Monitor Off] (P203) is
activated, and the Monitor/Viewfinder turns off.
• When an object or your hand is positioned near the eye sensor, the Monitor display may switch
to the Viewfinder display.
• This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
• It is only displayed on the monitor when the camera is connected to a PC or printer.
• Is the card inserted in the camera?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the software “PHOTOfunSTUDIO” to write pictures from PC to
card.
• Set [Playback Mode] to [Normal Play]. (P212)
• When Red-Eye Removal ([ ] or [ ]) is performed, red parts may be corrected to black.
> We recommend recording images with Flash Mode set to [‰] or [Red-Eye Removal] set to
[OFF]. (P178)
Monitor/Viewfinder
The Monitor/Viewfinder turns off although the camera is turned on.
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
Monitor and viewfinder do not switch when [LVF] is pressed.
Playback
The picture is not played back.
There are no recorded pictures.
Red part of the recorded image has changed colour to black.
To Next Page
Loading...
Need help?
General
