y (check orientation)
(check orientation)
not touch terminal
Status indicator
SD memory card/
SDHC memory card (sold separately)
Set the camera ON/OFF switch to OFF
Slide to the 'OPEN' position
and open the lid
OPEN
LOCK
Release lever
Completely insert battery
and card
(both click into place)
Close lid
Slide to the 'LOCK' position.
=inTo remove
• To remove battery:
move lever in
direction of arrow.
• To remove card:
Lever press down in center.
@Always use genuine Panasonic batteries. (CGA-S007A)
@If you use other batteries, we cannot guarantee the quality of this product.
@Do not remove card or battery while power is 'ON' or while status indicator is on
(Camera may cease operating correctly, or cardlrecorded contents may be damaged).
@The reading/writing speed of a MultiMediaCard is slower than an SD memory card.
When a MultiMediaCard is used, the performance of certain features may be slightly
slower than advertised.
@Keep the Memory Card out of reach of children to prevent swallowing.
VQT1 P79
17