Record information as to what day and where pictures were taken by setting departure
dates and destinations.
Set-up: • Clock must be set in advance (R19).
• Press 'MENU/SET' -_ '_,SETUP MENU' -_ Select 'TRAVEL DATE' (P.20)
5
6
7
Select 'LOCATION'
¢ , i
,,,2 v_j_,
_./'.[_ CANCEL_ SELECT_,_ EXIT_
Select 'SET'
,_ _ >_s ................l
_ _/Q,!' TRAVELSETUP sE
:@Y ....................o4;"
_QT),_/ SELECT'$
Enterdestination
•Textinputmethod(P.72)
• Press 'MENU/SET' twice after inputting
text to complete.
IITo release @
Setting is released automatically one
return date has passed. To release before
this date, select 'OFF' in step 2, and
press 'MENU/SET' twice.
@The number of days elapsed is displayed for approx. 5 sec. when switching from
playback to recording mode. (I_11 displayed at bottom-right of screen)
@When destination is set in 'WORLD TIME' (next page), days elapsed are calculated
based on local destination time.
@If settings are made before holiday, number of days to departure are displayed in
orange with a minus sign (but not recorded).
@When 'TRAVEL DATE' is displayed in white with a minus sign, the 'HOME' date is one
day in advance of the 'DESTINATION' date (this is recorded).
@Text in 'LOCATION' can be edited after recording with 'TITLE EDIT' (R72).
@To print travel date or destination -_ Use 'TEXT STAMP' (R73), or print using supplied
CD-ROM (PHOTOfunSTU DIO-viewer-).
@Names in 'BABY' and 'PET' scene modes cannot be recorded when 'LOCATION' is set.
@'LOCATION' cannot be recorded in motion picture recording.
VQT1P79 53
To Next Page
Loading...
