Use component cable (sold separately: DMW-HDC2) to enjoy still and motion pictures in
high definition _. Please check that the TV you are connecting to has a 1080i input terminal.
DMC-TZ5 Only
Connect the camera (COMPONENT OUT terminal) to a TV with a component cable,
and set the TV to receive component terminal input.
Hold here
\
Check socket direction and insert straight in.
to socket shape can lead to faulty operation.)
To audio sockets
Component cable
(sold separately, DMW-HDC2)
@Playback cannot be performed in clipboard mode.
@Blank stripes may appear at the sides or at the top and bottom of the screen, depending
on aspect ratio setting.
@Images displayed vertically may be slightly blurred.
@Pictures cannot be simultaneously displayed on the LCD monitor.
@We recommend recording still pictures with 'PICTURE SIZE' of at least 2M, and motion
pictures with 'PICTURE MODE' set to '16:9H' (DMC-TZ5 only).
@Do not use cables other than that specified here (sold separately, DMW-HDC2).
@Output will be in 16:9 aspect ratio, regardless of 'TV ASPECT' setting.
@Component output will be canceled if a USB connection cable is connected.
@No picture output will occur through AV cables connected simultaneously.
@Audio output is monaural.
@Following functions cannot be set in playback mode.
DUAL PLAY (DMC-TZ5 only), TITLE EDIT, TEXT STAMP, RESIZE, TRIMMING,
ASPECT CONV., AUDIO DUB., COPY, multiple selection (delete, etc), or creating still
pictures from motion pictures (DMC-TZ5 only), etc.
@Images may be momentarily distorted immediately after commencing playback or
pausing on certain televisions.
VQT1 P79
87
To Next Page
Loading...
