Viewing on TV screen
You can view _tures on a TV screen by
connecting your camera to your TV with the
AV cable (sued) or compnent cable (sold
seprately: DMW-HDC2).
@Also consult TV operating manual,
Set-up: • Set'TV ASPECT'. (P.26)
• Turn off both camera and TV,
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
Hold here
\
1
2
3
Connect camera to TV
Turn on TV
@Set to auxiliary input,
Turn on camera
Yellow: To video socket
White: To audio socket
AV cable
• always use cable supplied
==Ifyour TV has an SD memory card slot,
you can view still pictures by inserting a card directly.
• Use SDHC-compatibleTVs to playback images on SDHC memory cards.
@Do not use any other AV cables except the supplied one.
@You can view pictures on TVs in other countries (regions) which use the NTSC or PAL
system when you set 'VIDEO OUT' in SETUP menu.
Even if you set 'VIDEO OUT' to 'PAL', the output signal will still be NTSC in the
recording mode.
@When connected with AV cable, pictures will not be displayed on TV during recording of
motion pictures in '30fps 16:9H' or '15fps 16:9H', or during recording in 'BURST' or
'HI-SPEED BURST' scene mode. (DMC-TZ5 only)
@'LCD MODE' setting is not reflected on TV.
@Some televisions may cut off the edges of pictures, or not display them full screen.
Pictures rotated to portrait may be blurred slightly.
@Change picture mode settings on TV if aspect ratios are not displayed correctly on
widescreen or high-definition televisions.
@If problems such as picture flickering occur, set 'VIDEO OUT' (R26) to 'NTSC'.
6 VQT1P79
To Next Page
Loading...
Need help?
General
Weight and Dimensions
