Panasonic PT-RZ570

Chapter 3 Basic Operations — Switching on/off the projector
44 - ENGLISH
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image.
After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu →
[SCREEN SETTING].
1) Press qw to switch the setting.
f Proceed to Step 4) when [16:10] is selected.
16:10
4/6
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE
SCREEN FORMAT
ENTER
2) Press as to select [SCREEN POSITION].
16:9
0
4/6
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE
SCREEN FORMAT
ENTER
MENU SELECT
3) Press qw to adjust.
4) Press the <ENTER> button to proceed to the initial setting.
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1) Press qw to switch the setting.
+09:00
5/6
20XX/01/01
12：34：56
LOCAL DATE
LOCAL TIME
Please set up a time zone according to the area of your
country or region.
INITIAL SETTING
SET
CHANGE
TIME ZONE
ENTER
2) Press the <ENTER> button to proceed to the initial setting.