Panasonic SA-PT750PC - Disassembly of Tray Motor; Disassembly of Sensor P.C.B; Disassembly of Traverse Unit

10.28. Disassembly of Tray Motor
P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.3.
· Follow (Step 1) to (Step 3) of Item 10.4.
· Follow (Step 1) to (Step 4) of Item 10.5.
· Follow (Step 1) to (Step 4) of Item 10.7.
Step 1 Remove 2 screws from Tray Motor P.C.B.
Step 2 Release 2 claws at Tray Motor P.C.B.
Step 3 Remove Tray Motor P.C.B. from the tray base
assembly.
10.29. Disassembly of Sensor P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.3.
· Follow (Step 1) to (Step 3) of Item 10.4.
· Follow (Step 1) to (Step 4) of Item 10.5.
· Follow (Step 1) to (Step 4) of Item 10.7.
Step 1 Remove 1 screw from Sensor P.C.B.
Step 2 Release 2 claws at Sensor P.C.B.
Step 3 Remove Sensor P.C.B. from the tray base assembly.
10.30. Disassembly of Traverse Unit
· Follow (Step 1) to (Step 3) of Item 10.3.
· Follow (Step 1) to (Step 3) of Item 10.4.
· Follow (Step 1) to (Step 4) of Item 10.5.
· Follow (Step 1) to (Step 4) of Item 10.7.
· Follow (Step 1) to (Step 4) of Item 10.8.
Step 1 Rotate the cam gear anti-clockwise. (Align at position
(A) as marking on the gear with arrow)
Step 2 Flip the mechanism base assembly and place it in
vertical position.
Step 3 Press upward (a), push backward (b) and press (c) to
left to release the traverse unit.
68
SA-PT750P / SA-PT750PC