Panasonic SA-VK470EE - CD;DVD Changer Mechanism Error Code Table

8.4.5. CD/DVD Changer Mechanism Error Code Table
Error
Code
Diagnosis Contents Description of error Automatic FL Display Remarks
IHMS Cam gear abnormality For CD/DVD changer unit (CR14).
ICSL For CD/DVD changer unit (CR14).
ISTK For CD/DVD changer unit (CR14).
IPLY For CD/DVD changer unit (CR14).
ITOP UD assembly For CD/DVD changer unit (CR14).
IUDS UD assembly For CD/DVD changer unit (CR14).
HOME For CD/DVD changer unit (CR14).
LOAD For CD/DVD changer unit (CR14).Tray drive assembly
abnormal
Tray unit does not move from
"STOCK" to "PLAY" position.
Press [EXCHANGE] on main unit
for next error.
1. After tray is loaded to
"PLAY" position.
2. After tray is loaded to
"STOCK" position.
Press [EXCHANGE] on main unit
for next error.
Drive rack/gear
assembly
abnormal
After TOP SW is detected, UD
rack does not move into tray 1
position.
Press [EXCHANGE] on main unit
for next error.
Cam gear/gear
assembl
y
abnormal
Cam gear does not move to
"HOME" position under the
following conditions:
The tray drive rack does not
move to "PLAY" position. (Tray
does not move to "PLAY"
position)
UD rack does not move to
front position. This lead to UD
base not raise to top position
Press [EXCHANGE] on main unit
for next error.
Press [EXCHANGE] on main unit
for next error.
Press [EXCHANGE] on main unit
for next error.
Press [EXCHANGE] on main unit
for next error.
Press [EXCHANGE] on main unit
for next error.
Cam gear does not rotate to
"PLAY" driving position and
ence does not drive playing
tray to "STOCK" position.
Cam gear/gear units
abnormal
Cam gear does not rotate to
"HOME" position
The tray drive rack does not
move to "STOCK" position.
(Tray does not move to
"STOCK" position)
Drive rack/gear
assembl
y
abnormal
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
35
SA-VK470EE