EasyManua.ls Logo

Panasonic SC-HC40PC

Panasonic SC-HC40PC
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
7.3.2. Doctor Mode Table 2
Item
FL Display
Key Operation
Mode Name Description Front Key
FL Display Test To check the FL segments
display (All segments will
light up)
In Doctor Mode:
1. Press [1] button on remote con-
trol.
To cancel, press [0] button on remote
control.
To exit Doctor Mode, press but-
ton on main unit or remote control.
Volume Setting To check for volume setting
during this mode, Bass &
treble is set to 0dB & EQ is
switch off.
In Doctor Mode:
1. Press [7] button on remote control.
To exit Doctor Mode, press but-
ton on main unit or remote control.
In Doctor Mode:
2. Press [8] button on remote control.
To exit Doctor Mode, press but
-
ton on main unit or remote control.
In Doctor Mode:
3. Press [9] button on remote control.
To exit Doctor Mode, press but-
ton on main unit or remote control.
Mecha Sliding Panel
Reliability
To check the operation of
sliding Panel.
Sequence as follow :
1. Panel set to close
position.
2. CD Open & stop at left
position for 1s.
3. CD Close & stop at
centre position for 1s.
In Doctor Mode:
1.Press[ ]followby[2]&then
[1] button on remote control.
To cancel, press [0] button on remote
control.
To exit Doctor Mode, press but-
ton on main unit or remote control.
CD Traverse Un
it Test
Mode
To check for the traverse unit
operation. In this mode, the
first & last track is access &
read. (TOC). It fails when
TOC is not completed by IOS
or the traverse is out of
focus.
In Doctor Mode:
1. Press [ ], [1], [2] button on
remote control.
To cancel, press [0] button on remote
control.
To exit Doctor Mode, press but-
ton on main unit or remote control.
(For more information,
please refer to Section 7.3.4.)
CD Auto Adjustment
Display
To display result of self
adjustment for CD.
The [NO DISC] display will appear after 3s,
In Doctor Mode:
1. Press [ ], [1], [4] button on
remot
e control.
To cancel, press [0] button on remote
control.
To exit Doctor Mode, press but-
ton on main unit or remote control.

Table of Contents

Related product manuals