SMARTZONE UPS USER MANUAL
The outlet (1-48) active power is BELOW critical threshold
value
148-155
The sensor (1-8) temperature/humidity is ABOVE critical
threshold value
The sensor (1-8) temperature/humidity is BELOW critical
threshold value
The sensor (1-8) contact state is in alarm.
The sensor (1-8) lost communications.
User authentication failed.
187-189
Power or relay communication lost to main board
Input Phase (1-3) Frequency Asserted below lower critical.
Failure in sending the SMTP message.
Input Phase (1-3) Frequency Asserted above upper critical
Trap codes assigned for warning alarms:
Code
The PDU unit active power is ABOVE warning threshold
value.
The PDU unit active power is BELOW warning threshold
value.
The PDU warning energy alarm.
To Next Page
Loading...
Need help?
General
