SMARTZONE UPS USER MANUAL
The phase (1-3) voltage is ABOVE warning threshold value.
The phase (1-3) voltage is BELOW warning threshold value.
The phase (1-3) current is ABOVE warning threshold value.
The phase 1 current is BELOW warning threshold value.
The circuit breaker (1-12) current is ABOVE warning
threshold value.
The circuit breaker (1-12) current is BELOW warning
threshold value.
The circuit breaker (1-12) is in OFF state.
The outlet (1-48) active power is ABOVE warning threshold
value.
The outlet (1-48) active power is BELOW warning threshold
value.
The sensor (1-8) temperature/humidity is ABOVE warning
threshold value.
The sensor (1-8) temperature/humidity is BELOW warning
threshold value.
Trap codes assigned for information alarms:
Code
The circuit breaker (1-12) is in ON state.
The outlet (1-48) IMMEDIATE ON occurred.
The outlet (1-48) DELAYED ON occurred.
The outlet (1-48) IMMEDIATE OFF occurred.