Parker AC10 series Quick Start Guide

AC10 - IP20 Models
1 2 3 4 5 6 7
Order example 10 G - 1 1 - 0015 - B N
4, 5
Frame Size, Rated Current
480V Supply
6-0600 40 HP/30 kW
7-0750 50 HP/37 kW
7-0900 60 HP/45 kW
8-1100 75 HP/55 kW
8-1500 100 HP/75 kW
9-1800 125 HP/90 kW
9-2200 150 HP/110 kW
10-2650 200 HP/132 kW
11-3200 225 HP/160 kW
11-3600 250 HP/180 kW
6
Braking Module
B Braking Module Installed
7
EMC Filter
N No Filter Installed
F C3 EMC Filter Installed
2-3 Understanding the Product Code
Nameplate Example
This example nameplate shows the product as
an AC10 series IP20 2.2kW (3 HP) drive with
3-phase input.
3Ph: three-phase input; 380-480V, 50/60Hz: input
voltage range and rated frequency.
3Ph: 3-phase output; 6.5A, 2.2kW: rated output
current and power;
1
Product Family
10 AC10 VFD - IP20
2
Industry
G General Purpose
3
Voltage
1 230V Single Phase
3 230V Three Phase
4 480V Three Phase
4, 5
Frame Size, Rated Current
230V Supply
1-0015 0.25 HP/0.2kW
1-0025 0.5 HP/0.4kW
1-0035 0.75 HP/0.55kW
1-0045 1 HP/0.75kW
2-0050 1.5 HP/1.1kW
2-0070 2 HP/1.5kW
2-0100 3 HP/2.2kW
3-0170 5 HP/3.7 kW
4-0210 7.5 HP/5.5 kW
5-0300 10 HP/7.5 kW
5-0400 15 HP/11 kW
6-0550 20 HP/15 kW
480V Supply
1-0006 0.25 HP/0.2kW
1-0010 0.5 HP/0.4kW
1-0015 0.75 HP/0.55kW
2-0020 1 HP/0.75kW
2-0030 1.5 HP/1.1kW
2-0040 2 HP/1.5kW
2-0065 3 HP/2.2kW
3-0090 5 HP/4.0kW
3-0120 7.5 HP/5.5kW
4-0170 10 HP/7.5kW
4-0230 15 HP/11kW
5-0320 20 HP/15kW
5-0380 25 HP/18.5 kW
5-0440 30 HP/22kW

Parker AC10 series Specifications

General

Overload Capacity	150% for 60 seconds
Analog Inputs	2
Analog Outputs	1
Communication Options	Modbus RTU
Protection Rating	IP20
Input Voltage	200-240VAC, 380-480VAC, 500-575VAC, 600VAC, 690VAC
Digital Outputs	2
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Braking	Built-in dynamic braking