Parker AC10 series Quick Start Guide

Function
Code
Function Denition Setting Range Mfr’s Value Change
F210 Frequency display accuracy 0.01-2.00 0.01 √
F211 Speed of digital control 0.01-100.00Hz/s 5.00 √
F212 Direction memory
0: Disabled 1:
Enabled
0 √
F213
Auto-start after repowered
up
0: Disabled 1:
Enabled
0 √
F214 Auto-start after reset
0: Disabled 1:
Enabled
0 √
F215 Auto-start delay time 0.1-3000.0 60.0 √
F216 Auto-start restart attempts 0-5 0 √
F217 Fault reset delay 0.0-10.0 3.0 √
F218 Reserved
F219 Write EEPROM by Modbus
1: Disabled; 0:
Enabled
1 √
F220
Frequency memory after
power-down
0: Disabled 1:
Enabled
0 √
F221-
F223
Reserved
F224
When target frequency is
lower than min frequency
0: Stop
1: run at min freq
1 √
F225-
F227
Reserved
F228 Application selection
0: Invalid
1: Basic speed
control
2: auto/manual
control
3: Stage speed
control
4: Terminal
control;
5: PID control;
No Macro
selected
F229-
F230
Reserved
Parameter List and Default Settings
10-6

Parker AC10 series Specifications

General

Overload Capacity	150% for 60 seconds
Analog Inputs	2
Analog Outputs	1
Communication Options	Modbus RTU
Protection Rating	IP20
Input Voltage	200-240VAC, 380-480VAC, 500-575VAC, 600VAC, 690VAC
Digital Outputs	2
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Braking	Built-in dynamic braking