DOC-0017-04-EN: AC20 Series - Hardware Installation Manual
100 (154) DOC-0017-04-EN-A 22.03.2023
Application ‘1’: Standard (Basic Speed Control)
This Application is ideal for general purpose applications. It provides push-button or switched start/stop
control. The setpoint is the sum of the two analogue inputs AIN1 and AIN2, providing Speed Setpoint +
Speed Trim capability.
110-230Vac (or 24Vdc) voltage supply
Healthy: Relay output (to lamp)
Motor Thermistor ‘+’ connection
Motor Thermistor ‘-’ connection
Remote Setpoint (%) – input 1: 0-10V variable input (from potentiometer)
Remote Setpoint ‘Trim’ (%) – input 2: 4-20mA variable input (from current source)
Speed Demand (%): 0-10V variable output (to voltmeter)
Value = 100%: 0-10V variable output (+10V fixed reference voltage)
Run Forward: 24V digital input
Remote Reverse: 24V digital input
Not Stop: 24V digital input
Not Coast Stop: 24V digital input
STO DISABLED (drive operational)
S
To Next Page
Loading...
Need help?
General
