PCAN-Ethernet Gateway FD DR – User Manual
31
The CAN interfaces can be configured on the
Network > CAN
page. In addition, this page provides detailed information about
the interfaces
LAN Interface:
This box displays the LAN interface settings. IP address, Subnet
mask, and gateway are adjustable. The MAC address cannot be
changed. Each device receives a unique MAC address during the
manufacturing process, which can be used for identification.
The LAN interface can be configured on the
Network > LAN
page
Defined Routes:
Here the message forwarding is displayed with the following
information: index, status, used transmission protocol, source,
destination, used filters, and user notes.
On the
Routing > Manage Routes
page, existing routes can be
managed, edited, and deleted
On the
Routing > Add Route
page, new routes can be created
Defined Filters:
This box contains an overview of all defined filters with basic
information. Starting with the index, every filter is displayed with its
usage, user notes, name, type, and mode.
On the
Filter > Manage Filters
page, existing filters can be
managed, edited, and deleted
On the
Filter > Add Filter
page, new filters can be created
To Next Page
Loading...
