PCAN-Ethernet Gateway FD DR – User Manual
59
Temperatures
The PCAN-Gateway provides several sensors for monitoring the
operating temperatures, in particular the temperatures of the CPU,
the CPU board, and the power board.
A fan is built in between both circuit boards which is activated if the
temperatures exceed the upper operating temperature limit.
In addition, graphs are presented for the temperatures, if the fan is
switched on or off as well as the fan speed.
Configuration
Select a time from one minute to 24 hours to set the time range for
all graphs. Click the button to reload the page with updated images.
5.6.4 Software Update
Initiating
a software update will update the firmware, software,
configuration website, and JSON interface. The currently installed
software package version is indicated by the software version
number. This number can be found on the pages
Device > Software
Update
and
Device
in the footer of the website.
Current product updates can be downloaded on the PEAK-System
website (www.peak-system.com). Please make sure to download
the
correct package for your device. Every version of the PCAN-
Gateway product family has a separate download package.
It's recommended to backup the current configuration before
performing a software update or downgrade. The current settings
may get lost if they are not supported by the software package to be
installed or if a failure like a power cut happens.
To Next Page
Loading...
