PCAN-Ethernet Gateway FD DR – User Manual
6
Galvanic isolation of the CAN channels up to 500 V against each
other, against RS-232, and the power supply
Connections for CAN, RS-232, and power supply via 4-pole
screw-terminal strips (Phoenix)
LAN interface
Data transmission using TCP or UDP
10/100/1000 Mbit/s bit rate
RJ-45 connector with status LEDs
Monitoring and configuration of the devices via the web
interface or JSON interface
Software update via the web interface
Reboot or reset of the device to a previous software version with
a reset button
Plastic casing (width: 45.2 mm) for mounting on a DIN rail
(DIN EN 60715 TH35)
LEDs for device status and power supply
PCI Express Mini slot, USB port, and a RS-232 connector for
future use
Voltage supply from 8 to 30 V
Operating temperature range from -40 to 70 °C (-40 to 158 °F)
Fan for active cooling when a temperature limit is exceeded
1.2 Prerequisites for Operation
Voltage supply in the range of 8 to 30 V
To Next Page
Loading...
