PCAN-Ethernet Gateway FD DR – User Manual
57
Detailed information about the JSON interface is included in
the PCAN-Gateway developer documentation.
5.6.2 User Management
The
Device > User Management
page provides options for entering
new login credentials, changing and defining the display mode, and
determining what information should be visible on the login page.
Login Settings:
Enter your current login details in the upper part of the form. In the
lower part you can enter a new username and a new password. The
new password must be confirmed in order to exclude accidental
input.
To ensure a minimum level of security, the password should have
at least 8 characters. If possible, use letters, numbers, and special
characters.
Save your inputs with the Save Settings button.
Important notice: Login data is confidential! Do not act care-
lessly and leave your system open to attack. Never deposit the
login data in any form on the Internet or make it easily
accessible. Do not give the new login data carelessly to third
parties nor send it by e-mail.
Display Mode Setting:
This form provides the opportunity to change the display mode.
Expert mode enables access to more detailed information and
professional settings. Interpreting this information and using these
features requires advanced knowledge of TCP/IP, CAN, and the
message forwarding of the PCAN-Gateways.
To Next Page
Loading...
