PCAN-Ethernet Gateway FD DR – User Manual
44
IDs Meaning
X X X 1 1 0 1 X X 1 X CAN messages with an ID
matching this binary
value, are accepted. X
means that this bit
position does not matter.
MSB LSB
Name:
A name with up to 50 characters can be assign to a filter. It can be
used for identification while managing filters or attaching them to
routes.
User Notes:
Additional information with a length of 200 characters can be
entered for each filter. Besides the pages
Status, Filters, Filters >
Add / Edit Filter,
and
Filters > Manage Filters
this text is available
while route creation or editing.
Finally you can create the new filter with the Add Filter button or
save the changes after editing with the Save Settings button.
5.5 Network
The
Network
page provides information about the current configu-
ration of available communication interfaces.
CAN Interfaces:
For each CAN channel the status, the bit rates, and the setting of the
Listen-Only-Mode are displayed.
To Next Page
Loading...
