PeakTech 2755 - Using the Low Ohm Function; Low Ohm Function Menu Operations

5.5. Using the LOW-Ohm function
A continuity test is used to verify the integrity of connections by making a high resolution resistance
measurement. This is especially important for checking Protective Earth connections.
5.5.1. LOW OHM Function Menu Operation
Main Display
Menu Display
F1 Button
Pop-up and shutdown RCD menu , Shutdown mode is activated when the user
selects.
F2 Button
Pop-up and shutdown RCD menu , Shutdown mode is activated when the user
selects.
F3 Button
None
F4 Button
Triggering zero function.
Up Button
Up menu to select the current active sub-options.
Down Button
Down menu to select the current active sub-options.
Enter Button
Confirm the user select mode.
-86-