P350 flexitrax Operation Manual 31
*Approximate recording time based on 2GB storage memory device.
** Recordings exceeding 2 hours in length are split into multiple files
Quality: You can choose between 4 different profiles: High, Medium, Low and Custom.
Frame size: selects the dimensions (in pixels) of the recorded video. The options are:
o Full: PAL (720x576 pixels) or NTSC (720x480 pixels) depending on your
camera.
o VGA: 640x480 pixels.
o QVGA: Quarter VGA, 320x240 pixels.
Bitrate: sets the bitrate (memory usage in megabits, or Mb, per second of recording). Select between High,
Medium and Low.
Encoding: sets the encoding. Select between Progressive Full, Progressive Half or Interlaced.
NOTE: Selecting interlaced will create better quality video but it will not play on a PC running Windows XP or VISTA
OS unless a suitable CODEC is installed. FlexiSight Manager supports progressive encoding on Windows XP and
VISTA, while interlaced video works only on Windows 7.
Frame Rate: sets the number of frames per second that will be recorded / displayed. Select between:
o Maximum (30FPS for NTSC and 25FPS for PAL).
o Medium (20FPS).
o Minimum (10FPS).
NOTE: Bitrate is the only parameter that will affect your recording sizes. Higher bitrates will result in better video quality
and larger file sizes.
To Next Page
Loading...