Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Safety
Ref. MKT-IM-012 / D - 03.02.2022 11 / 110
2.2 Serial label location
Model
Part number
Electrical rating
Serial number
Production date
Production order
Mandatory
Ensure that the serial label and the safety labels on the device are completely legible
and clean!
If necessary, replace them with new labels in the same positions.
2.3 Hazards
All the safety and protection instructions contained in this document must be observed in order to
avoid temporary or permanent injury, damage to property or environmental pollution.
At the same time, any other legal regulations, accident prevention and environmental protection
measures, as well as any recognized technical regulations relating to appropriate and risk-free
methods of working which apply in the country and place of use of the device must be adhered to.
Any non-observation of the safety and protection rules, as well as any existing legal and technical
regulations, will result in a risk of temporary or permanent injury, damage to property or
environmental pollution.
2.3.1 Personnel
CAUTION
Risk of injury due to improper handling!
Only qualified and professional personnel, based on their training, experience and
instruction as well as their knowledge of the regulations, safety rules and operations
performed, are authorized to carry out necessary work.
2.3.2 Material
The following points must be observed to ensure proper operation of the system and the safety of
user:
• be careful of high voltages present on the transformer (230V, 50Hz);
• do not put your fingers in the system (risk of injuries with moving parts and shock due to
electric voltage).
To Next Page
Loading...
Need help?
General
