Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Maintenance
Ref. MKT-IM-012 / D - 03.02.2022 77 / 110
9.6.4 Pilot filter screen cleaning
1. Using a Torx key, unscrew and extract the injector screen cap (1).
2. Unclip the white plastic basket (2) and clean it with a soft brush.Use of descaling agent such
as white vinegar might be required in case of impurities on the plastic basket (2).
3. Check for O-rings integrity before reinserting the injector screen cap (1).
4. Reverse above procedure steps to rebuild.
To Next Page
Loading...
