Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Installation
Ref. MKT-IM-012 / D - 03.02.2022 43 / 110
5.6 Connections (electrical)
Lockout connection (764 only)
Chlorine generator outlet
(EU versions only)
AC transformer input (low voltage)
Main motor & optical sensor
connection
Sensor input for turbine 760/762
Dry contact signal input 740/742
Secondary valve motor control (764 only)
5.7 Bypassing
A bypass valve system should be installed on all water conditioning systems. Bypass valves isolate
the softener from the water system and allow unconditioned water to be used. Service or routine
maintenance procedures may also require that the system is bypassed.
Normal operation
Out In Out In
In Bypass
To Next Page
Loading...
