Installer Manual Foleo - Programming
Ref. MKT-IM-038 / C - 15.11.2019 43 / 112
Valve
System 4
Type 4 (single system) is currently the only
available selection.
Valve 5800
Regen type Softener delayed
Regeneration type is described in detail on
page 18.
Media volume 10, 15, 20 or 28 L
Respectively for Foleo 10, Foleo 15, Foleo 20
and Foleo 30.
Salt dosage 100 or 150 g/L Depending on inlet hardness.
BLFC size 0.500 gpm
Capacity
g/L CaCO
3
or
°Hm
3
Only required on softener metered systems to
calculate treated water capacity and reserve.
Represents total system capacity between
regenerations.
Hardness
Calculates treated water capacity and
reserve. Represents hardness of untreated
water.
Calendar
override
regeneration
Off - 1 - 99 days Report to local regulation.
Regeneration
time
HH:MM Set at a time of no or low water usage.
Reserve Variable reserve
Only available when softener meter delayed
regeneration type is selected.
Selecting fixed % or fixed volume will display
additional configuration options.
Variable reserve is calculated based on
previous day's water usage.
Regeneration
Regeneration
flow
Variable refill/brining
Cycle steps on the home screen and during
regeneration will change to reflect the cycle
steps and order.
Variable refill/brining calculates refill time
based on salt dosage, media volume, and
BLFC Size, and it is not possible to change it.
Relay output Aux.1/Aux.2 Off
Meter
Meter type 0.75" turbine
Emergency
regeneration
Off
Continuous
flow detect
On
Gives an alarm if continuous flow is detected
at the outlet.
Screen name Parameters Values Notes
To Next Page
Loading...
