6
Settings
99
4 Press E.
5 Press F.
The screen of Step 2 reappears.
Repeat Steps 2 to 5.
6 Press F twice.
Select the file format to change to when X or Y is pressed
for each [File Format] setting.
1 Set [Fx1 Button] or [Fx2 Button] to [One Push
File Format] in Step 3 of “Setting the Button
Operation” (p.98).
2 Select Z or Y for [Cancel after 1 shot].
3 Select the file format when
X or Y is pressed.
The left side is the [File Format]
setting and the right side is the
changed file format when X or
Y is pressed.
u Caution
• The One Push File Format function cannot be used when
[Memory Card Options] in the A2 menu is set to [Separate
RAW/JPEG]. (p.43)
For each exposure mode, you can set the functions for when
Q and R are turned and M is pressed.
1 Select [E-Dial Programming] of [Button
Customization] in A5 or C2 menu and press
D.
The [E-Dial Programming] screen appears.
2 Select an exposure mode and press D.
The screen for the selected exposure mode appears.
3 Press D and use AB to
select the combination of
functions for when Q
and R are turned and M
is pressed.
Setting the One Push File Format
Z
The recording format returns to the [File Format]
setting of [Image Capture Settings] in the A2 menu
after a picture is taken.
Y
The setting is retained until any of the following
operations is performed:
• When X or Y is pressed again
• When 3, F, or G is pressed, or when the
mode dial or main switch is turned
Fx1 Button
Cancel after 1 shot
One Push File Format
Cancel
OK
Setting the E-dial Operation
I
Change Shutter Speed
J
Change Aperture Value
ISO
Change Sensitivity
e
EV Compensation
XG
Return to G Mode
GSHIFT
Program Shift
GLINE
Program Line
-- Not available
Exposure Mode
Cancel
OK
To Next Page
Loading...
Need help?
General
