Pentax K-1 User Manual

3
Shooting
59
1 Select T on the Drive
Mode screen and press B.
2 Use CD to select T, 1, or U.
Proceed to Step 6 when T is selected.
3 Press G.
4 Select the operation mode.
5 Press E.
The screen of Step 1 reappears.
6 Set the number of shots and bracket value.
Available operations
7 Press E.
The camera returns to standby mode.
8 Shoot.
After pictures are taken, the camera returns to standby
mode.
t Memo
• The bracket value can be set in increments of 1/3 EV steps or
1/2 EV steps according to the [1 EV Steps] setting of the E1
menu.
• The following settings for Bracketing can be set in the E2
menu.
• The bracket value can also be changed by the Smart
Function. (p.19)
Bracketing
T Bracketing
1 Bracketing + Self-timer
U Bracketing + Remote Control
±0.3E V±0.3EVx3x3
BracketingBracketing
CancelCancel OKOK
ResetReset
Bracketing
Bracketing
Self-timer
Self-timer
Cancel
Cancel
OK
OK
Bracketing
Bracketing
Remote Control
Remote Control
Cancel
Cancel
OK
OK
Q
Sets the number of shots.
R
Changes the bracket value (up to ±3
EV).
JR
Adjusts the exposure compensation
value.
M
Resets the compensation value to the
default setting.
11 Bracketing Order
Changes the shooting order of
pictures.
12 One-Push Bracketing
Takes all pictures with one
release of the shutter.

Pentax K-1 Specifications

General

Sensor	CMOS
ISO Range	100-204800
Autofocus Points	33
Image Processor	PRIME IV
Viewfinder	Optical (pentaprism)
Video Resolution	Full HD 1080p
Weather Sealing	Yes
Battery Life	760 shots
Camera Type	DSLR
Sensor Size	35.9 x 24 mm
Image Sensor Format	Full Frame
Image Stabilization	Sensor-shift
Continuous Shooting	4.4 fps
LCD Screen Size	3.2 inches
LCD Screen Resolution	1, 037, 000 dots
Battery	D-LI90
Dimensions	136.5 x 110 x 85.5 mm
GPS	Yes
Wi-Fi	Yes
Screen	3.2-inch tilting LCD
Weight	1010g
Shutter Speed	1/8000 to 30 sec
Viewfinder Type	Optical (pentaprism)
Storage Media	SD/SDHC/SDXC