EasyManuals Logo

Pentax K-1 User Manual

Pentax K-1
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
3
Shooting
69
4 Set whether to use Auto Align or not.
5 Press F twice.
The camera returns to standby mode.
t Memo
The HDR type can also be changed by the Smart Function.
(p.19)
u Caution
HDR Capture is not available in M, N, or C mode.
HDR Capture cannot be used in combination with some other
functions. (p.107)
When the drive mode is set to [Interval Shooting] or [Interval
Movie Record], [Auto Align] is fixed to Y (Off).
When [Auto Align] is set to Y (Off), [Shake Reduction] of the
A4 menu is fixed to [OFF].
For HDR Capture, multiple images are combined together to
create a single image, so it may take time to save the image.
By using the built-in Shake Reduction unit of the camera,
blurring of images can be reduced. Set in [Shake Reduction] of
the A4 menu.
t Memo
The Shake Reduction function can also be turned on or off by
the Smart Function. (p.19)
When [Shake Reduction] is assigned to X or Y, you can
turn the Shake Reduction function on or off by a simple button
operation. (p.98)
The following features can be set in
[Lens Correction] of the A4 menu.
t Memo
Corrections can only be made when a compatible lens is
attached. (p.108) The features are disabled when using an
accessory such as rear converters that is attached between
the camera and the lens.
When [File Format] is set to [RAW] or [RAW+] in [Image
Capture Settings] of the A2 menu, correction information is
saved as a RAW file parameter and you can select whether
to apply the correction to the images when developing them.
For the RAW Development function, [Color Fringe Correction]
can also be set. (p.85)
u Caution
The Lens Correction features are not available when [Crop]
of the A2 and C1 menus is set to 2 while a DA or DA L
lens (except DA
k
200mm F2.8 ED [IF] SDM, DA
k
300mm F4
ED [IF] SDM, and DA 560mm F5.6 ED AW lenses) is
attached.
Z
Uses Auto Align.
Y
Does not use Auto Align.
Shake Reduction
A4
Lens Correction
A4
Distortion
Correction
Reduces distortions occurring due to lens
properties.
Peripheral
Illumin. Corr.
Reduces peripheral light fall-off occurring
due to lens properties.
Lat-Chromatic-Ab
Adj
Reduces lateral chromatic aberrations
occurring due to lens properties.
Diffraction
Correction
Corrects blur caused by diffraction when
using a small aperture.
Distortion Correction
Distortion Correction
Peripheral Illumin. Corr.
Peripheral Illumin. Corr.
Lat-Chromatic-Ab Adj
Lat-Chromatic-Ab Adj
Diffraction Correction
Diffraction Correction
Lens Correction
Lens Correction

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax K-1 and is the answer not in the manual?

Pentax K-1 Specifications

General IconGeneral
SensorCMOS
ISO Range100-204800
Autofocus Points33
Image ProcessorPRIME IV
ViewfinderOptical (pentaprism)
Video ResolutionFull HD 1080p
Weather SealingYes
Battery Life760 shots
Camera TypeDSLR
Sensor Size35.9 x 24 mm
Image Sensor FormatFull Frame
Image StabilizationSensor-shift
Continuous Shooting4.4 fps
LCD Screen Size3.2 inches
LCD Screen Resolution1, 037, 000 dots
BatteryD-LI90
Dimensions136.5 x 110 x 85.5 mm
GPSYes
Wi-FiYes
Screen3.2-inch tilting LCD
Weight1010g
Shutter Speed1/8000 to 30 sec
Viewfinder TypeOptical (pentaprism)
Storage MediaSD/SDHC/SDXC

Related product manuals