Name: Pentax K-1
Brand: Pentax
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Playback

Connect to an AV device, such as TVs, equipped with an HDMI

terminal to display Live View images while shooting or to play

back images in playback mode.

Make sure to have a commercially available HDMI cable

equipped with an HDMI terminal (type D).

1 Turn the AV device and camera off.

2 Open the terminal cover of the camera, and

connect the cable to the HDMI terminal.

3 Connect the other end of the cable to the input

terminal on the AV device.

4 Turn the AV device and camera on.

The camera turns on in HDMI mode, and the camera

information is displayed on the screen of the connected AV

device.

u Caution

• While the camera is connected to an AV device, nothing is

displayed on the camera monitor. Also, you cannot adjust the

sound volume on the camera. Adjust the volume on the AV

device.

t Memo

• Check the operating manual of the AV device and select a

suitable input terminal for connecting the camera.

• By default, the maximum resolution supported by both the AV

device and camera is automatically selected. If it fails to play

back images properly, change the setting in [HDMI Out] of the

D2 menu.

• If you intend to use the camera continuously for a long period,

the use of the optional AC adapter kit is recommended. (p.35)

Connecting the Camera to an AV Device

Questions and Answers:

Need help?

Do you have a question about the Pentax K-1 and is the answer not in the manual?

Pentax K-1 Specifications

General