1
Introduction
11
With this camera, you can take pictures while looking through
the viewfinder or while viewing the image on the monitor.
When using the viewfinder, you can take pictures while
checking the status screen displayed on the monitor and looking
through the viewfinder. (p.39) When not using the viewfinder,
you can take pictures while viewing the Live View image
displayed on the monitor. (p.40)
The camera is in “standby mode” when it is ready to shoot, such
as when the status screen or Live View image is displayed.
Press G in standby mode to display the “control panel” and
change settings. (p.20) You can change the type of information
displayed in standby mode by pressing G while the control
panel is displayed. (p.14)
t Memo
• You can set the display color of the status screen, control
panel, and menu cursor in “Initial Settings” (p.36).
Display Indicators
Monitor
Capture Mode
G
G
1/1/
25 0250
16 0 01600
FF
5.65.6
99 9 9999999
99 9 9999999
1/1/
25 0250
16 0 01600
FF
5.65.6
99 9 9999999
99 9 9999999
99 9 9999999
99 9 9999999
10:2310:23
32003200
Status ScreenStatus ScreenStatus Screen
AUTO ISO (Maximum)AUTO ISO (Maximum)AUTO ISO (Maximum)
02/02/201602/02/2016
Standby mode
(Status screen)
Shooting Info Display
selection screen
Control panel
Adjusting the Monitor Brightness
If the monitor display is difficult to
see when you take pictures
outdoors or in other situations,
adjust the brightness of the
monitor in [Outdoor View Setting]
of the D1 menu. When [Outdoor
View Setting] is assigned to X or
Y, you can adjust the brightness of the monitor by a simple
button operation. (p.98) By default, [Outdoor View Setting] is
assigned to Y (B).
1/1/
25 0250
16 001600
FF
5.65.6
99 99 999999
99 99 999999
Outdoor View SettingOutdoor View Setting
To Next Page
Loading...
Need help?
General
