Name: Pentax K-1
Brand: Pentax
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Introduction

The monitor can be moved in four directions (up, down, left, and

right).

1 Hold the camera with one

hand and hold the both the

right and left of the monitor

and pull it out with the

other hand.

2 Adjust the monitor angle.

The monitor angle can be adjusted up to approximately 44°

upward or downward, and up to approximately 35° to left or

right.

u Caution

• Do not forcefully pull out or apply strong force to the monitor.

• Keep the monitor retracted when carrying the camera.

t Memo

• The monitor can be moved in four

directions with it placed on the base

cradle. When the monitor is pulled

up from the base cradle as shown in

the illustration on the right, you can

take pictures by holding the camera

at the waist high position.

• When the monitor is pulled out, you

can illuminate the backside controls

by pressing 8. (Default setting: Off) Change the setting in

[Backside Controls] of [Illumination Settings] in the D2 menu.

(p.100)

• When retracting the monitor, place the monitor on the base

cradle and then push both the right and left edges of the

monitor to the camera body.

Adjusting the Angle of the Monitor

Base cradle

Questions and Answers:

Need help?

Do you have a question about the Pentax K-1 and is the answer not in the manual?

Pentax K-1 Specifications

General