3
Shooting
53
t Memo
• Q is displayed in the viewfinder when the AF point can be
changed. The selected AF point can be checked also in the
viewfinder. (p.17)
• For the autofocus operation when shooting with the
viewfinder, the following settings can be set in [Phase
Detection AF] of the A1 menu.
In [Hold AF Status], you can set whether to immediately
reactivate autofocus or to maintain the focus for a certain
amount of time before reactivating autofocus when the
subject happens to move out of the selected focusing area
after being focused. The default setting is to reactivate
autofocus a little while after the subject moves out of focus.
• You can select the button operation when changing the
focusing area in [20 Change AF Point Button] of the E3
menu.
1 Turn R while pressing
b.
u Caution
•In R mode, the autofocus mode is fixed to e.
AF Mode x, y
AF Active Area K, I, E, F, G, H, D
AF.S Setting Focus-priority, Release-priority
1st Frame Action in AF.C
Auto, Focus-priority, Release-
priority
Action in AF.C Cont.
Auto, Focus-priority, FPS-
priority
Hold AF Status Off, Low, Medium, High
Type1
Switches the function of the arrow keys (ABCD)
to the AF point change mode or the direct key
operation mode when c is pressed.
Type2
Switches the function of the arrow keys (ABCD)
to the AF point change mode only when c is
pressed.
Setting the AF Mode during Live
View
A1/C1
e
Face
Detection
Detects and tracks faces of people.
The main face detection frame for AF
and AE is displayed in yellow.
f Tracking
Tracks the subject in focus.
The shutter can be released even if the
subject is not in focus.
g
Multiple AF
Points
Sets the focusing area to the desired
area.
The sensor is divided into 35 areas (7
horizontal by 5 vertical), and you can
select a wider or narrower focusing
area by using 1, 9, 15, or 25 of those 35
available areas.
h
Select Sets the focusing area by the pixel.
i
Spot
Sets the focusing area to a limited area
at the center.
1/
2000
F2.8
1600
9999
Face Detection
To Next Page
Loading...
Need help?
General
