1
Introduction
8
1 Illumination button (8)
Provides lighting for the LCD panel, the backside controls,
the lens mount, and the card slot/connector. You can set
whether to turn on the light or not for each part. (p.100)
2 ISO button (N)
Press to change the ISO sensitivity. (p.49)
3 Shutter release button (0)
Press to capture images. (p.40)
In playback mode, press halfway to switch to capture mode.
4 Main switch
Turns the power on or off, or activates the preview function.
(p.36, p.55)
5 Front e-dial (Q)
Changes the values for camera settings such as exposure.
(p.45)
You can change the menu category when a menu screen is
displayed. (p.21)
In playback mode, use this to select a different image.
6 EV Compensation button (J)
Press to change the exposure compensation value. (p.46)
7 Mode dial lock button
Press to allow the mode dial to be turned. (p.39)
8 Mode dial
Changes the capture mode. (p.44)
9 Mode dial lock release lever
Use this lever to release the mode dial lock to operate the
mode dial without pressing the mode dial lock button. (p.41)
0 Lock button (7)
Temporarily disables dial and button operations to prevent
misoperation. (p.41)
a RAW/Fx1 button (X)
You can assign a function to this button. (p.98)
b AF Mode button (b)
Press to change the autofocus mode or the focusing area.
(p.51)
c Focus mode switch
Changes the focus mode. (p.51)
d AE Metering/Delete button (2/L)
Press to change the metering method. (p.50)
In playback mode, press to delete images. (p.42)
e Live View button (K)
Displays the Live View image. (p.40)
Operating Controls
HDR
BKT
CH/CL
ISO
Wi
-
Fi
Crop
SR
Grid
HDR
BKT
CH/CL
ISO
Wi
-
Fi
Crop
SR
Grid
2
f
c
j
k
n
p
9
8
g
i
h
o
7
4
3
a
0
5
1
e
d
l
b
m
6
q
r
s
To Next Page
Loading...
Need help?
General
