2
Getting Started
36
4 Rotate the memory card
cover as shown by 3, and
slide it in the direction of
4.
u Caution
• Do not remove the memory card while the card access lamp
is lit.
• If the memory card cover is opened while the power is on, the
camera turns off. Do not open the cover while the camera is
in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.38)
• Use a high-speed memory card when recording movies. If the
write speed cannot keep up with the recording speed, writing
may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to “Memory Card Settings” (p.43).
• You can illuminate the card slot chamber by pressing 8.
(Default setting: Off) The card slot chamber is illuminated
even when the camera is turned off. Change the setting in
[Card Slot/Connector] of [Illumination Settings] in the D2
menu. (p.100)
Turn the camera on and make the initial settings.
1 Turn the main switch to
[ON].
The first time the camera is
turned on after purchase, the
[Language/W] screen
appears.
t Memo
• The power automatically turns off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D2 menu.
1 Use ABCD to select the desired language and
press E.
The [Initial Setting] screen
appears in the selected
language.
Proceed to Step 6 if F
(Hometown) does not need to be
changed.
2 Press B to move the frame to F and press D.
The [F Hometown] screen appears.
3 Use CD to select a city.
Use R to change the region.
Refer to “List of World Time
Cities” (p.120) for cities that can
be selected as a hometown.
4
3
Initial Settings
Turning the Camera On
Setting the Display Language
Text SizeText Size Std.Std.
New YorkNew York
EnglishEnglish
Initial SettingInitial Setting
Settings completeSettings complete
CancelCancel
HometownHometown
New YorkNew York
DSTDST
CancelCancel OKOK
To Next Page
Loading...
Need help?
General
