3
Shooting
71
By shaking the Shake Reduction unit, a moiré reduction effect
simulating that of a low-pass filter can be achieved.
1 Select [AA Filter Simulator] in A4 menu and
press D.
2 Select a type and press
E.
u Caution
• This function cannot be used in some capture modes or in
combination with some other functions. (p.107)
• [Bracketing] cannot be selected in the following situations.
•In M mode
• When the drive mode is set to other than [Single Frame
Shooting], [Self-timer] (12 seconds, 2 seconds), or
[Remote Control] (now, after 3 seconds)
• When HDR Capture is set
• When the shutter speed is faster than 1/1000 seconds, the full
effect of this function cannot be achieved.
By using the Shake Reduction mechanism, the composition of
the image can be adjusted. Use this function when you want to
adjust the composition, such as when using a tripod while
shooting with Live View.
1 Select [ON] in [Composition Adjust.] of A4
menu.
2 Press F.
The camera returns to standby mode.
3 Press K.
Live View is displayed and the message [Adjust the
composition of the image] appears.
4 Adjust the composition.
The amount of adjustment (the
number of steps) is displayed at
the top right of the screen.
Available operations
5 Press E.
The camera returns to standby mode in Live View.
Anti-Aliasing Filter Simulator A4
Type1
Takes pictures while balancing the
resolution and moiré reduction.
Type2 Prioritizes moiré reduction.
Bracketing
Takes consecutive 3 images in order of
[Off], [Type1], and [Type2].
4
Shake Reduction
Horizon Correction
Input Focal Length
AA Filter Simulator
Lens Correction
Composition Adjust.
Cancel
OK
Composition Adjustment
A4
ABCD
Moves the composition of the image (up
to 24 steps).
R Adjusts the level of the composition (up
to 8 steps. Not available when the
amount of adjustment steps is 17 or
more).
M
Resets the adjustment value to the
default setting.
0
0
0
Adjust the composition
of the image
Cancel
OK
To Next Page
Loading...
Need help?
General
