1
22
Introduction
Menu List
Rec. Mode Menus
Menu Item Function Default Setting Page
A1
Phase
Detection
AF
AF Mode
*1
Selects the autofocus method for shooting with the viewfinder.
x p.51
AF Active Area
*1
Selects the area to adjust the focus for shooting with the
viewfinder.
Auto
(33 AF Points)
p.52
AF.S Setting
Sets the action priority for when the autofocus mode is set to
x and 0 is fully pressed.
Focus-priority p.53
1st Frame Action in
AF.C
Sets the action priority for the first frame when the autofocus
mode is set to y and 0 is fully pressed.
Auto p.53
Action in AF.C Cont.
Sets the action priority during Continuous Shooting when the
autofocus mode is set to y.
Auto p.53
Hold AF Status
Maintains the focus for a certain amount of time when the
subject happens to move out of the selected focusing area
after being focused.
Low p.53
Contrast
Detection
AF
Contrast AF
*1
Sets the autofocus mode for shooting with Live View. Face Detection p.53
Focus Peaking
*1
Emphasizes the outline of the subject in focus and makes it
easier to check the focus.
Off p.54
Contrast AF Options Sets the action priority for when 0 is fully pressed. Focus-priority p.54
AF Assist Light
*1
Discharges the assist light when autofocusing in dark locations.
On p.51
AE Metering
*1
Selects the part of the sensor to use for measuring brightness
and determining the exposure.
Multi-segment p.50
ISO AUTO Setting
*1
Sets the range of automatic correction in ISO AUTO and the
AUTO ISO Parameters.
ISO 100 to ISO
3200/Standard
p.49
Flash Mode
*1
Sets the flash mode.
Flash On or
Auto Flash
Discharge
p.65
Program Line
*1
Selects the Program Line setting. Normal p.46
Exposure
Mode
*2
Exposure Mode
Temporarily changes the exposure mode when the mode dial
is set to one of the modes from O to 5.
G
p.102
Program Line
Selects the Program Line setting when the mode dial is set to
one of the modes from O to 5.
Normal
To Next Page
Loading...
Need help?
General
