1
Introduction
14
You can change the type of
information displayed in standby
mode by pressing G while the
control panel is displayed. Use CD
to select the type and press E.
When shooting with the viewfinder
When shooting with Live View
t Memo
• The screen selected on the Shooting Info Display selection
screen appears when the camera is turned off and on again.
Shooting Info Display
Status
Screen
Displays the settings for shooting with the
viewfinder. (p.12)
Electronic
Level
Displays the camera
angle.
A bar scale indicating
the horizontal camera
angle appears at the
center of the screen,
and a bar scale
indicating the vertical
camera angle
appears on the right
side. When the angle exceeds the range that
can be displayed in each bar scale, the indicator
segments of the scale are displayed in red.
Display Off Nothing is displayed on the monitor.
Electronic
Compass
Turns on the GPS
function and displays
the current latitude,
longitude, altitude,
lens direction,
Coordinated
Universal Time
(UTC), capture mode, and other information.
1/
250
1600
F
5.6
99999
99999
Status Screen
1/
250
1/
250 F5.6F5.6 16001600 0.00.0
Example:
Tilted 1.5° to the left
(yellow)
Vertically level (green)
1/
250
1/
250 F5.6F5.6 16001600 0.00.0
10:00:0010:00:00
0°
N
36°45.410'N
36°45.410'
W140°02.000'W140°02.000'
89m89m
02/02/201602/02/2016
Standard
Information
Display
The Live View image and the settings for
shooting with Live View are displayed. (p.12)
Electronic
Level
The electronic level is displayed in Standard
Information Display.
No
Information
Display
Certain icons, such as those for the capture
mode and drive mode, are not displayed.
When the Camera is Held Vertically
When the camera is rotated to the vertical
position, the status screen is displayed
vertically. To not display the status screen
vertically, set [Auto Screen Rotation] to Y
(Off) in [Other Display Settings] of the A5
menu. (p.24)
1/
250
1600
F
5.6
99999
99999
To Next Page
Loading...
Need help?
General
