1
31
Introduction
E3
15 WB Adjustable Range
Sets whether to automatically fine-tune the white balance when
the light source is specified for the white balance setting.
Fixed p.63
16 AWB in Tungsten Light
Sets the tungsten light color tone when the white balance is set to
[Auto White Balance].
Strong
Correction
p.63
17 WB When Using Flash Sets the white balance setting when using a flash.
Auto White
Balance
p.63
18 Color Temperature Steps
Sets the adjustment steps for the Color Temperature option of the
white balance.
Kelvin p.64
19 Enable/Disable Control
Enables or disables operation of the selected group of buttons and
dials.
Type1 p.41
20 Change AF Point Button
Selects the c operation when the focusing area selection mode
is set to one of some select-type options.
Type1 p.53
21 Auto SR Off
Automatically turns off the Shake Reduction function when the
drive mode is set to [Self-timer] or [Remote Control].
Enable Auto
SR Off
p.56
E4
22 Save Rotation Info Saves rotation information when shooting. On p.79
23 Save Menu Location
Saves the last menu tab displayed on the monitor and displays it
again the next time F is pressed.
Reset Menu
Location
p.21
24 Catch-in Focus
Enables Catch-in Focus shooting when a manual focus lens is attached.
The shutter is released automatically when the subject comes into focus.
Off p.110
25 AF Fine Adjustment
Allows you to precisely fine-tune your lenses with the camera’s
autofocus system.
Off p.54
26 Using Aperture Ring
Enables the shutter to release when the lens aperture ring is set
to a position other than 9 (Auto).
Disable p.109
Reset Custom Functions
Resets all the settings of the Custom Setting menus to the defaults.
––
Menu Item Function Default Setting Page
To Next Page
Loading...
Need help?
General
