132
Shooting Functions
4
3
Use the four-way controller
(45) to select g.
4
Press the four-way controller (3)
and use the four-way controller
(45) to select g.
5
Press the 4 button.
The camera is ready to take a picture.
6
Press the shutter release button
halfway.
The autofocus system operates. The
focus indicator ] appears in the
viewfinder when the subject is in focus.
7
Press the shutter release button
fully.
The front self-timer lamp starts blinking
slowly and then blinks rapidly 2 seconds
before the shutter is released. The beep
is heard and the rate increases for the last
2 seconds. The shutter will be released
about 12 seconds after the shutter release button is pressed fully.
OK
MENU
Cancel OK
Drive Mode
Single Frame Shooting
OK
MENU
2
s
Drive Mode
Cancel OK
Self-timer (12 sec.)
To Next Page
Loading...
