191
Shooting Settings
6
Enables capturing images at high dynamic range. Takes three frames
(underexposed, standard (proper exposure) and overexposed) to create a
single composite image with them.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller (2345) to select [HDR
Capture] and press the 4 button.
The [HDR Capture] screen appears.
3
Use the four-way controller (45)
to select [Off], [Standard] or
[Strong].
4
Press the 4 button.
The camera returns to the control panel.
HDR Capture
• When HDR Capture is set, the file format is always set to [JPEG] and cannot
be changed. You cannot use HDR Capture when the file format is set to
[RAW].
• When HDR Capture is set, Multi-exposure is not available. Also, the drive
modes other than 9 (Single Frame Shooting) and h (Remote Control) are
not available.
• HDR Capture cannot be used with Cross Processing or Digital Filter at the
same time. The mode set last is used.
• You cannot use HDR Capture when the shutter speed is set to h.
• During HDR Capture, multiple frames are combined together to create a
single image, so it will take time to save an image.
• During HDR Capture, pressing the 3 button while an image is being
saved cancels the process and saves the image as a standard image.
• The Shake Reduction function is automatically turned off when HDR Capture
is set. In this case, use a tripod to prevent camera shake.
MENU
HDR
OFF
HDR
1
HDR
2
OK
OK
HDR Capture
Cancel
Off
To Next Page
Loading...
Need help?
General
Weight and Dimensions
