233
Processing Images
8
Developing RAW Images
You can convert captured RAW files into JPEG files.
1
Select a RAW image in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select h (RAW
Development) and press the 4 button.
The screen to select the development method is displayed.
4
Use the four-way controller (23)
to select [Developing Single
Image] and press the 4 button.
The parameters recorded in the image file
appear.
You can select a different image by
turning the e-dial.
To specify the parameters before
developing, refer to “Specifying the
Parameters” (p.236).
Only RAW files captured with this camera can be edited. RAW files and JPEG
files captured with other cameras cannot be edited on this camera.
Developing One RAW Image
MENU
JPEG
OK
Developing Multiple Images
Developing Single Image
OK
MENU
12M
sRGB
RAW
JPEG
OK
100-0001
File Format
To Next Page
Loading...
Need help?
General
Weight and Dimensions
