254
Changing Additional Settings
9
2
Use the four-way controller (23)
to select the type of batteries.
When set to [Auto-detect], the camera will
automatically detect the type of batteries
being used.
3
Press the 4 button.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Sets the operation of the power lamp from [Standard] (default setting),
[Low] or [Off].
Set in [20. Power lamp] of the [A Custom
Setting 3] menu (p.81).
When a type of batteries different from that selected in the menu setting is
used, the battery level will not be correctly determined. Please set the correct
battery type. Usually, there is no problem using [Auto-detect]. However in low
temperatures and when using batteries that were stored for long periods of
time, set the appropriate battery type so the camera can correctly determine
the remaining battery level.
Setting the Operation of the Power Lamp
Even if the power lamp is set to [Off], the lamp lights up while the camera is
transferring data to a computer when connected using the USB cable.
1min.
MENU
123 4
AUTO
OK
Auto Power Off
AUTO
AUTO
Ni-MH
AL
Li
OKCancel
Select Battery
Auto-detect
Nickel-Metal Hydride
Alkaline
Lithium
20.
1
2
3
MENU
OK
OK
Power lamp
Standard
Low
Off
The power lamp is lit
Cancel
when the camera is
switched on
To Next Page
Loading...
Need help?
General
Weight and Dimensions
