45
Getting Started
2
Push the SD Memory Card in once to
remove.
4
Close the card cover (3) and
then slide it in the direction of
the arrow (4).
Precautions When Using the SD Memory Card
• The SD Memory Card is equipped with a
write-protect switch. Setting the switch to
LOCK prevents new data from being
recorded on the card, the stored data from
being deleted, and the card from being
formatted by the camera or computer.
• Care should be taken when removing the SD Memory Card immediately after
using the camera because the card may be hot.
• Do not open the card cover, remove the SD Memory Card or turn the camera
off while images are being played back or saved to the card, or the camera is
connected to a computer with the USB cable. Doing so may cause the data to
be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away
from water and store away from high temperatures.
• Do not remove the SD Memory Card during formatting. The card may be
damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following circumstances.
We do not accept any liability for data that is deleted if
(1) the SD Memory Card is mishandled by the user.
(2) the SD Memory Card is exposed to static electricity or electrical interference.
(3) the SD Memory Card has not been used for a long time.
(4) the SD Memory Card is ejected or the batteries are removed while the data
on the card is being recorded or accessed.
4
3
Write-protect
switch
To Next Page
Loading...
Need help?
General
Weight and Dimensions
