OPC / OPD / OPE
Vision Configurator Software
2015-07
47
7.5 Sensor Data
This area shows the type of sensor connected, the firmware version of the
connected sensor, and the MAC address.
Figure 7.20 Sensor data
7.6 Sensor Output
This area shows the communication between the Vision Configurator and the
connected sensor. To select which messages are to be displayed, select View >
Displayed message types.
Figure 7.21 Sensor output
Two buttons are located in the lower area.
Save output Saves the content of the window to a text file.
Delete Deletes the contents of the window.
To Next Page
Loading...
